Retaining walls (RW) are among the most common geotechnical structures. They have been widely used in railways, bridges (e.g. bridges abutment), buildings, hydraulic and harbor engineering. Once built, the RW can be exposed to dynamic loads, such as those produced by earthquakes, machines, vehicles and explosions. They must remain operational in aftermath of the natural or human-induced dynamic events. Hence, the understanding of the geotechnical response of RW to these dynamic loads is critical for the safe design of several civil engineering structures such as railways, highways, bridges, and buildings. Although fairly reliable methods have been developed for assessing and predicting the response of RW to dynamic loads induced by earthquakes, there is very little information to guide engineers in the design of RW that are exposed to surface explosions (surface blast loadings). These methods for assessing RW response to earthquake loads cannot directly be applied to the design of RW subjected to surface blast loads. Indeed, blast loads are short duration dynamic loads and their durations are very much shorter than those of earthquakes. The predominant frequencies of a blast wave are usually 2-3 orders of magnitudes higher than those of earthquake wave, and the same can be said for blast wave acceleration as compared to the peak acceleration that results from an earthquake. Thus, RW response under blast loading could be significantly different from that under a loading with much longer duration such as an earthquake. There is a need to increase our understanding of the response of RW to surface explosion loadings since there is a significant increase of terrorist threat on important buildings and some lifeline infrastructures. Transportation structures (bridges, highway, and railway) are unquestionably being regarded as potential targets for terrorist attacks. The purpose of this PhD research is to investigate the geotechnical response of reinforced concrete retaining wall (RCRW) with sand as a backfill material to surface blast loads. The soil-RW model was subjected to a simulated blast load using a shock tube. The influence of the backfill relative density, backfill saturation, blast load intensity, and live load surcharge on the behaviour of RCRW with sand backfill was studied. The dimensions of the stem and heel of the retaining wall in this study were 650 mm (height) x 500 mm (width) x 60 mm (thickness) and 400 mm (width) x 500 mm (length) x 60 mm (thickness), respectively. Soil-RW model was placed inside a wooden box. The overall height of the box was 1565 mm. The retained backfill extended behind the wall for 1300 mm.
Based on the results, it is found that the maximum dynamic earth pressures were recorded at a time greater than the positive phase duration regardless of the backfill condition. The total earth pressure distribution along the height of the wall showed that the magnitude of total earth pressure for loose and medium backfill at the mid-height of the wall slightly exceeded the dense backfill. In addition, the lateral earth pressures increased with the increase in the blast load intensities. On the other hand, under the same load conditions, an increase in the wall movement was noticed in loose backfill, and a translation response mode was evident in this condition. The mobilized passive resistance of the RW backfill induced by blast load was used to determine the force-displacement relationship. Finally, the susceptibility of the RW with saturated dense sand to liquefaction was examined, and it was ascertained that liquefaction was not triggered when the RW was subjected to a blast load of 50 kPa.
The results and findings of this PhD research will provide valuable information that can be used to evaluate the vulnerability of transportation structures to surface blast events as well as to develop guidance for their design.
Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/42596 |
Date | 30 August 2021 |
Creators | Abdul-Hussain, Najlaa |
Contributors | Fall, Mamadou, Saatcioglu, Murat |
Publisher | Université d'Ottawa / University of Ottawa |
Source Sets | Université d’Ottawa |
Language | English |
Detected Language | English |
Type | Thesis |
Format | application/pdf |
Page generated in 0.0014 seconds