Return to search

Seismic Design Of Cold Formed Steel Structures In Residential Applications

iv
ABSTRACT
SEISMIC DESIGN OF COLD FORMED STEEL STRUCTURES IN
RESIDENTIAL APPLICATIONS
Uygar, Celaletdin
M.Sc., Department of Civil Engineering
Supervisor: Prof. Dr. &Ccedil / etin Yilmaz
May 2005, 82 pages
In this study, lateral load bearing capacities of cold formed steel framed wall panels are investigated. For this purpose lateral load bearing alternatives are analyzed numerically by computer models and results are compared with already done
experimental studies and approved codes.
In residential cold formed steel construction, walls are generally covered with cladding material like oriented strand board (OSB) or plywood on the exterior wall surface and these sheathed light gauge steel walls behave as shear walls with significant capacity. Oriented strand board is used in analytical models since OSB claddings are most commonly used in residential applications. The strength of shear walls depends on different parameters like screw spacing, strength of sheathing, size of fasteners used and aspect ratio. SAP2000 software is used for structural analysis of walls and joint force outputs are collected by Microsoft Excel.
The yield strength of shear walls at which first screw connection reaches its shear capacity is calculated and load carrying capacity per meter length is found. The nonlinear analysis is also done by modeling the screw connections between OSB and frame as non-linear link and the nominal shear capacities of walls are calculated for different screw spacing combinations. The results are consistent with the values in shear wall design Guide and International Building Code 2003. The other lateral load bearing method is flat strap X-bracing on wall surfaces. Various parameters like wall frame section thickness, flat strap area, aspect ratio and bracing number are investigated and results are evaluated.
The shear walls in which X-bracing and OSB sheathing used together are also analyzed and the results are compared with separate analyses.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12607294/index.pdf
Date01 May 2006
CreatorsUygar, Celaletdin
ContributorsYilmaz, Cetin
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.002 seconds