In this study, the optical simulation software Light Tools was executed to reduce the LED amount used by improving the performance of light guide plate of backlight module with LED illuminator. The improvement of the design including: 1.replacing the V-cut microstructures on the lower layer of the light guide plate by the micro-semispherical lens structures;2.replacing the diffusion film by the micro-semispherical lens structures on the upper layer of the light guide plate ; 3.adding the lateral microstructure on the light guide plate to reduce the dark-area phenomenon.
The sizes of upper/lower microstructures, their spacings and the amount of LED were selected as the parameters and applying L18 orthogonal array to process the simulations firstly. Then integrating different kind of lateral microstructures to find the best uniformity, and obtain a set of parameters that could improve the performance of backlight module and then the amount of LED can be reduced.
The results show that the uniformity of backlight module is over 88% without diffusion film which have overcome the requirement of 85% in traditional design with 2 diffusion films. This improvement not only reduces the cost from diffusion film, also removes the dark-area phenomenon. Additionally, the amount of LED is reduced to 45 from 48 that retrench about 7% of power. Energy and cost are saved simultaneously.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0114110-151739 |
| Date | 14 January 2010 |
| Creators | Chen, Wen-fei |
| Contributors | T. N. Shiau, Chi-hui Chien, Young-Chang Chen, Hsieh-Chi Chang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0114110-151739 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.002 seconds