Concern regarding grinding media wear is as old as the invention of the tumbling mill itself. Over the years many techniques have been tried in an attempt to minimize costs associated with grinding. These have included experimentation with different metals, non-metals and different shapes. Through all this, steel grinding balls have proved the most effective media for comminution in tumbling mills. / As old as the tumbling mill is, no accurate technique for estimating the wear of the ball charge has been developed. The mining industry still utilizes the Bond Abrasion test that was developed in the early 1960s. This test which is based solely on the ore properties is inadequate giving a standard deviation in excess of 100%. This can results in high degree of error which for greenfield applications can indicate profitability for non-profitable operations and vice versa. / Peter Radziszewski proposed a decoupled total grinding media wear model that could be used to predict grinding media instead of using the Bond abrasion test. This new model had a standard deviation of 56%, which was a great improvement over the bond abrasion wear estimates. This new model also allowed for the first time, the three wear modes, abrasion, corrosion and impact, responsible for grinding media wear to be quantified. This was an important development as the ability to identify the dominant wear mode in any given operation gives operators a chance to target reduction of wear. The current mining trend is towards exploitation of lower grade ores as the higher grades become depleted. These low-grade ores require finer grinding for the liberation of the value minerals. This in turn means higher ball consumption and higher beneficiation costs. The reduction of ball wear to minimise the overall cost of ore processing operation is going to be a primary concern for all concentrators. / The objective of the research that forms the basis of this thesis was to improve the accuracy of the decoupled grinding media wear model. This was achieved by refining the tests and methodologies used to determine the wear components that make up the decoupled grinding media wear model, performing fundamental testwork to determine a more accurate structure of the decoupled model, and validating this new model. / The new model termed the "modified decoupled grinding media wear model", gives better accuracy in predicting grinding media wear than both the Bond abrasion test and the original decoupled model.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.103372 |
| Date | January 2007 |
| Creators | Chenje, Tapiwanashe W. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Engineering (Department of Mechanical Engineering.) |
| Rights | © Tapiwanashe W. Chenje, 2007 |
| Relation | alephsysno: 002666844, proquestno: AAINR38572, Theses scanned by UMI/ProQuest. |
Page generated in 0.0027 seconds