Return to search

Volba vhodných řezných podmínek pro obrábění hlavňových ocelí / Prediction of suitable cutting conditions for machining of main steels

In this thesis is described machining of barrel steels and determination of the most suitable cutting conditions for this process. In the theoretical part was characterized cutting process and explained problems of VBD wear, chip formation and roughness of the surface. There were also explained most common cutting materials and in the last part were described CVD and PVD coating methods. In the experimental part was measured force load during turning. There was also tested eight carbide cutting inserts from SECO TOOLS. During the tests were measured additional surface roughness values and taken chip samples as well. From the evaluated load force data were determined optimized cutting conditions for machining barrel steels and most suitable type of cutting insert.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378854
Date January 2018
CreatorsBeneš, Ondřej
ContributorsFiala, Zdeněk, Jaroš, Aleš
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0015 seconds