The diploma thesis deals with design of plan – curved footbridge over Berounka river near the town of Čivice. Three different options were developed. First option includes a single – beam prestressed integral construction with haunches. The second option includes suspension footbridge construction, where the bridge deck is suspended at one side. In the third option the main span is built from concrete segments. Those are suspended on a pair of steel arches. The access ramps are cast – in – place, and they are supported by round steel piers. This variant was finally chosen as the best one and it was further processed. The construction was analyzed with Scia Engineer 2015 software, considering the construction process. The footbridge was loaded with dead loads and live loads including traffic and thermal actions. The internal forces were calculated and the construction was assess to the serviceability and ultimate limit states. In terms of serviceability, stress in concrete sections and deformations were checked. In terms of the ultimate limit state, the ultimate load capacities were calculated. The steel arches and piers were checked for possibility of loss of stability by buckling. The loss of stability was also checked by the software. Finally the dynamic behaviour of the construction was assessed, especially the harmonic excitation response. Then the construction plan and the drawings were made. The drawings include overview drawings and detailed drawings.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:240378 |
| Date | January 2016 |
| Creators | Zlatuška, Karel |
| Contributors | Romportl, Tomáš, Stráský, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds