The fractional catalytic pyrolysis of pine was studied both experimentally and through models. A preliminary stage economic analysis was conducted for a wood chip pyrolysis facility operating at a feed rate of 2000 wet ton/day for producing bio-oil.
In the experimental study, multiple grams of bio oil were produced in a single run to facilitate the more extensive characterization of the oil produced from pyrolysis of biomass impregnated with different catalysts. Two reactors configurations, a screw extruder and a tubular pyrolysis reactor, were explored to perform fractional catalytic pyrolysis of biomass. The main aim of performing a wood pyrolysis reaction in a modified screw extruder is to facilitate the simultaneous collection of bio-oil produced from staged temperature pyrolysis of three main components of wood, cellulose, hemicellulose and lignin, at a reasonable scale. Apart from complete characterization of bio-oil, this will enable us to study the effect of various selected catalysts on the quality of bio-oil and the percentage of char produced, and the influence of process parameters on chemical composition of the pyrolysis oils. These experiments were later performed in a tubular pyrolysis reactor due to the difficulty of making different parts of the extruder work well together. The goal of these experiments is to produce bio-oil in multiple grams from fractional catalytic pyrolysis of wood. This will enable us to study the effect of catalyst on the chemical composition of the oil and percentage of char produced.
In the modeling studies, a model of an auger reactor comprised of three different zones run at different temperatures to facilitate the collection of oil from pyrolysis of three major components of wood, namely cellulose, hemicelluloses and lignin, was developed. The effect of residence time distribution (RTD), and zone temperatures based on kinetic models on the yield of products was studied. Sensitivity of the Arrhenius rate constants calculated from synthetic data with respect to small variations in process parameters was evaluated.
In the economic analysis of a wood chip pyrolysis facility, mass and energy calculations were performed based on a feed rate of 2000 wet tons/day of wood chips to the dryer. The cost of bio-oil at 10% return on investment was proposed and the sensitivity of the selling price of bio-oil with respect to capital and operating costs was analyzed.
The experimental study will serve as a benchmark in exploring the above mentioned reactor configurations further. Alkali metal carbonates were used to study the quality of oil produced from pine pyrolysis. It was established that these catalysts, when added in the same molar ratio basis, increase the percentage of char. However, complete characterization of these oils for different catalysts needs to be done.
Systems modeling of pyrolysis in an auger reactor established that the kinetic parameters (depending on experimental set up) and the RTD (Residence Time Distribution) parameters play a crucial role in determining the yield of oil. Variations in temperature of zone 3 play a crucial role in varying the output of oil whereas variations in temperatures of zones 2 and 1 do not significantly impact the output of oil. For a given reaction kinetic scheme for the pyrolysis reactions, calculated values of the kinetic rate constants are not sensitive to errors in experimental conditions. It was also established that the experimental error in calculation of the RTD parameters can induce error in calculation of the Arrhenius constants but these values can still predict the yield of products accurately.
In the economic analysis of wood chip pyrolysis, the selling price of the bio-oil according to the cost calculation is projected to be $1.49/gal. The production cost of bio-oil is $ 1.20/gal. The cost of bio-oil is extremely sensitive to variations in operating cost (for example, cost of feed stock and selling price of char) and is not significantly affected by the variations in capital cost.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/42844 |
| Date | 11 November 2010 |
| Creators | Goteti, Anil Chaitanya |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0032 seconds