Synthetic polymer materials have been a part of human life since the 20th century. A variety of their use had resulted in a growing demand for their mass production, which then led to their increasing accumulation at waste dumps. After their deposition, these materials are exposed to many environmental factors causing their decomposition and subsequent release of the degradation products into the environment. This thesis is focused on the analysis of the photodegradation products from synthetic polymer materials and particularly polyurethane foams modified with the biodegradable fillers. One dimensional GC/MS and two dimensional comprehensive gas chromatography with time-of-flight mass spectrometry (GCxGC/TOF-MS ) were used for the measurements. The most of photodegradation products of polyurethane foams are injurious to health and environment.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:216540 |
| Date | January 2009 |
| Creators | Čumová, Martina |
| Contributors | Vávrová, Milada, Čáslavský, Josef |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0027 seconds