The presence of moisture in the soil reduces its shear strength. After the rain or snowmelt, the high percentage of moisture in the subgrade of highway, causes the instability resulting into failure of the highway due to high water table. Therefore, it is essential to install a drainage system to remove the excess moisture from the subgrade of highways to avoid its failure.
In the present study, six different soil samples have been studied to observe its failure by triaxial shear strength and corresponding moisture content was noted. The tension applied to remove moisture was converted to equivalent drain depth. The relationships were studied between shear strength versus drain depth and moisture content versus drain depth. From these relationships the design drain depth for different types of soils studied was recommended. The present study also suggest that the design drain depth for the highways can be approximated directly using water retention curve.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-5682 |
| Date | 01 May 1987 |
| Creators | Al-Himdani, Mizher |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0023 seconds