Return to search

Análise numérica e experimental da biestabilidade turbulenta no escoamento transversal sobre cilindros paralelos com razão de espaçamento 1,26

O presente trabalho aborda um estudo sobre o fenômeno de biestabilidade em escoamentos transversais turbulentos sobre dois cilindros lisos paralelos, com razão de espaçamento, p/d, de 1,26, utilizando abordagem numérica e experimental. Nas comparações consideram-se o domínio computacional e a seção de testes experimental equivalentes. As análises comparam escoamentos turbulentos com números de Reynolds subcríticos, variando entre Re = 17000 e Re = 26000, além disto, uma análise laminar comparativa com Re = 167 é executada. Nas avaliações experimentais utilizam-se velocidades médias e flutuações de velocidade, adquiridas com a técnica de anemometria de fio quente, exploram-se também dados de flutuações de pressão obtidos com microfones condensadores posicionados na parede do canal aerodinâmico. Para comparação experimental e numérica executam-se leituras de pressões estáticas ao longo do canal aerodinâmico. Os sinais temporais das aquisições são analisados estatisticamente com médias e momentos, transformada de Fourier e transformada de ondaletas para caracterização e identificação do fenômeno biestável. Na avaliação numérica é executada a solução das equações de Navier-Stokes, utilizando a simulação LES (Large Eddy Simulation) com modelo Smagorinsky-Lilly dinâmico para sub-malha e a simulação URANS (Unsteady Reynolds Averaged Navier-Stokes) com o modelo de turbulência k ω – SAS (Scale Adaptive Simulation). Os resultados das duas abordagens são comparados utilizando as médias de valores, comportamento temporal e valores do número de Strouhal. O estudo de qualidade de malha, com o método GCI (Grid Convergence Index), é aplicado nas malhas utilizadas em URANS. Para a validação da simulação LES, aplica-se análise de quantidade de energia cinética resolvida comparando com resultados experimentais e uma metodologia para verificação da solução descrita na literatura, com a qual um comparativo entre duas simulações LES com diferentes malhas é executado. Nos resultados numérico e experimental observam-se a presença da biestabilidade e nota-se o comportamento não simultâneo da mesma ao longo dos cilindros. Este comportamento é observado nas análises numérica e experimental. A formação assimétrica das esteiras também é estudada e atribuída à interação entre os vórtices das esteiras, já que, inicialmente, os desprendimentos dos mesmos são simétricos. Na investigação do escoamento entre os cilindros a presença da perturbação da velocidade média é observada, mas a mesma não apresenta relação direta com a troca biestável. A alteração do patamar da velocidade média, neste caso, é resultado da influência da troca de modos que acontece nas esteiras. A biestabilidade também é observada na flutuação de pressão, de forma similar ao comportamento obtido com flutuações de velocidade nos estudos da literatura. No comparativo entre os dois métodos numéricos observa-se boa concordância nos resultados obtidos utilizando URANS com modelo k ω – SAS em relação aos observados com LES, sendo possível prever os principais comportamentos, mesmo com a aplicação da lei de parede na região entre cilindros na simulação URANS. / This paper reports a study on the bistable phenomenon in turbulent crossflow over two parallel smooth cylinders with spacing rate, p/d, 1.26 using numerical and experimental approaches. In the comparisons, the computational domain and experimental tests section are considered equivalents. Turbulent flows with subcritical Reynolds numbers ranging between Re = 17000 and Re = 26000 are compared and, in addition, a comparative laminar analysis with Re = 167. In the experimental evaluations the mean velocity and fluctuations velocities are used and acquired with the hot-wire anemometry technique, exploiting also pressure fluctuations data, obtained with condenser microphones positioned in the wall of the aerodynamic channel. For experimental and numerical comparisons, the static pressure over the aerodynamic channel using pressure taps is executed. The temporal signals from the acquisitions are analyzed statistically with mean and moments, Fourier transform and wavelet transform for characterization and identification of the bistable phenomenon. In the numerical evaluation performed, the Navier-Stokes equations are solved using LES simulation (Large Eddy Simulation) with Smagorinsky-Lilly dynamic model for sub-grid and URANS simulation (Unsteady Reynolds Averaged Navier-Stokes) with the turbulence model k ω – SAS (Scale Adaptive Simulation). The results of the two numerical approaches are compared using the mean values, temporal behavior and values of the Strouhal number. The mesh quality study is executed using the GCI (Grid Convergence Index) for the mesh used in URANS. To validate the LES simulation, the amount of solved kinetic energy is compared with experimental amounts. For verification of the LES solution a method described on literature is used, in which a comparison between two LES simulations with different meshes is performed. In the numerical and experimental results, the presence of bistability were observed and in addition the non-simultaneous behavior of the phenomenon over the cylinder was identified in both analyzes. The wakes asymmetric formation was also studied and attributed to the interaction between the vortices of the wakes, since initially the detachments are symmetrical. In the investigation of the flow between the cylinders, the presence of the average velocity disturbance is observed, but it does not have direct relation with the bistable switch. The change in the average velocity level, in this case, is the result of the switching modes influence from the change in the wakes. The bistability is observed also in pressure fluctuation, similar to the behavior obtained with velocity fluctuations in the literature. Comparing the two numerical methods were observed good agreement in the results obtained using URANS with model k ω - SAS in relation to those observed with LES, being possible to predict the main behaviors, even with the application of wall law in the region between cylinders for the URANS simulation.

Identiferoai:union.ndltd.org:IBICT/oai:lume56.ufrgs.br:10183/135011
Date January 2015
CreatorsNeumeister, Roberta Fátima
ContributorsMoller, Sergio Vicosa, Petry, Adriane Prisco
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.002 seconds