This master´s thesis deals with the design of a steam turbine for a small nuclear power plant with a power of 50 MWe. In the first part of the work is proposed thermal and mass balance. The turbine has seven unregulated steam extractions, which are divided: two are for high-pressure feedwater heater, four are for low-pressure condensate heater and one is for degassing. The next chapter deals with the calculation of the regulation stage which is designed like an A-wheel and here is also strength control. Then, a pre-design and a detailed design of the stage part with the reaction blading. The stage part is consisted of eight cones with a total number of 27 stages. In the following chapters, is calculated the compensating piston, seals system and bearings. In the end, is made the consumption diagram. Part of the work is a conceptual drawing of a steam turbine section. The resulting steam turbine has a power output 50,197 MW and an internal thermodynamic efficiency of 73,9 %.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443174 |
| Date | January 2021 |
| Creators | Biskup, Michal |
| Contributors | Fiedler, Jan, Kracík, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds