Pre-clinical evaluation of novel antimicrobial coatings for blood-contacting devices commonly relies on the performance of animal studies since alternative in vitro models do not adequately represent the interactions between blood, bacteria, and material surfaces as they occur in vivo. To reduce the need of these cost-intensive and controversial animal tests, this project was dedicated to the development of a new model setup that overcomes this limitation and allows in vitro evaluation under in vivo-like conditions. This newly developed model was intended to be directly applied to evaluate recently in-house developed antimicrobial coatings, so-called anchor polymers. Therefore, the project was divided into two parts.
The first part of the project focused on the evaluation of the anchor polymer coatings concerning their applicability in blood-contacting devices. For this purpose, the PEGylated styrene-maleic acid copolymers were intensively studied using established laboratory tests. These examinations showed very promising results regarding adsorption and stability on relevant polymer substrates, antimicrobial efficacy, and biological safety of the coatings, thus revealing their great potential for future applications in medical devices. Moreover, this basic characterization was meant to allow a subsequent comparison of the new in vitro model with state-of-the-art in vitro tests.
The second part of the thesis focused on the development of the realistic in vitro model. Here, a single-pass flow system realized the implementation of adjustable flow conditions. Furthermore, incubation with freshly drawn human blood provided a physiological nutrient environment and included the influence of an immune response. Staphylococcus aureus were chosen as representative microorganisms, as they are responsible for a majority of device-related blood stream infections. The resulting blood flow model was validated with one anti-adhesive and one contact-killing anchor polymer coating, confirming the model’s ability to differentiate the investigated surfaces. Inflammatory and coagulant blood activation correlated slightly with bacterial coverage, which in turn was strongly dependent on the investigated material surface. Incubation with varying flow conditions demonstrated the model’s capability to reflect the well-documented dependence of bacterial colonization and occurring flow conditions. In contrast to the state-of-the-art in vitro tests, the simultaneous incubation of test surface, bacteria and whole blood allowed the analysis of mutual interactions of the three parameters. Thus, the model represents an excellent method for pre-clinical evaluation of novel antimicrobial coatings for blood-contacting devices.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:83848 |
| Date | 28 February 2023 |
| Creators | Valtin, Juliane |
| Contributors | Werner, Carsten, Wiesmann, Hans-Peter, Technische Universität Dresden, Leibniz-Institut für Polymerforschung |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:doctoralThesis, info:eu-repo/semantics/doctoralThesis, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0287 seconds