Object my master’s thesis is the design a Medical device uninterruptible power supply with managment system utilizing I2C bus. Norm EN 61000-3-2 define electric parameters for medical device power supply. In case of power supply for medial equipment is expressive accent on increased electric strength. This power supply have usually primary and secondary power circuit. Primary power circuit form line accumulator, which supplies needed output to the load and recharge reserve battery. Secondary is formed battery-pack, which serve as back-up power supply at drop-out prime circle. They have a minimum weight, small proportions, large overall effectivity also charging battery-pack and monitoring battery-pack charging condition. Result whole those master’s thesis is design Medical device uninterruptible power supply with managment system utilizing I2C bus and realization board layout. Resulting characteristics designed supply unit are: Output voltages are 5V/ 3 A , 12V/ 1,5 A and -12V/ 0,1 A. Managment support information about: Line adapter/ battery pack switch, battery-pack charging condition and actuall tempera-ture battery-pack.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217249 |
| Date | January 2008 |
| Creators | Daněček, Vít |
| Contributors | Hanák, Pavel, Šilhavý, Pavel |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds