A common goal for industrial manufacturers is to create a safer working environment and reduce production costs. One common method to achieve this goal is to drastically reduce cutting fluid use in machining. Recent advances in machining technologies have made it possible to perform machining with minimum-quantity lubrication (MQL). Drilling takes a key position in the realization of MQL machining. In this study the effects of using MQL in drilling AISI 1018 steel with HSS tools using a vegetable based lubricant were investigated. A full factorial experiment was conducted and regression models were generated for both surface finish and hole size. Lower surface roughness and higher tool life were observed in the lowest speed and feed rate combination.
Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc9739 |
Date | 12 1900 |
Creators | Shaikh, Vasim |
Contributors | Boubekri, Nourredine, Nasrazadani, Seifollah, Foster, Philip, Kougianos, Elias |
Publisher | University of North Texas |
Source Sets | University of North Texas |
Language | English |
Detected Language | English |
Type | Thesis or Dissertation |
Format | Text |
Rights | Public, Copyright, Shaikh, Vasim, Copyright is held by the author, unless otherwise noted. All rights reserved. |
Page generated in 0.0014 seconds