This thesis is concerned with the response of multi-story prestressed concrete frames to seismic loading, and the ductility demands of the constituent members. In that regard, an idealized model for the end moment-plastic rotation relationship of prestressed concrete members was developed based on a published moment-curvature idealization for prestressed concrete. The idealized moment-rotation model, which included stiffness and strength degradation, was used to introduce all post-elastic action In a beam-column element, which consisted of an elastic beam connecting concentrated hinges modeled as nonlinear rotational springs. The subsequent use of the element in the nonlinear analysis of a typical multi-story prestressed concrete frame indicated that both the lateral displacements, and the girder end rotational and hinge curvature ductilities would be somewhat higher for a prestressed concrete frame than for a reinforced concrete frame with the same initial stiffness and strength. As an effort to limit deflections, and minimize member damage under moderate seismic loading the use of a higher base shear for a prestressed concrete structure than for a comparable reinforced concrete structure appears warranted. / Applied Science, Faculty of / Civil Engineering, Department of / Unknown
Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/21762 |
Date | January 1979 |
Creators | Bannister, David Earl |
Source Sets | University of British Columbia |
Language | English |
Detected Language | English |
Type | Text, Thesis/Dissertation |
Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0104 seconds