FPGA fault recovery techniques, such as bitstream scrubbing, are only limited to detecting and correcting soft errors that corrupt the configuration memory. Scrubbing and related techniques cannot detect permanent faults within the FPGA fabric, such as short circuits and open circuits in FPGA transistors that arise from electromigration effects. Several Built-In Self-Test (BIST) techniques have been proposed in the past to detect and isolate such faults. These techniques suffer from routing congestion problems in modern FPGAs that have a large number of logic blocks. This thesis presents an improved BIST architecture for all Xilinx 7-Series FPGAs that is scalable to large arrays. The two primary sources of overhead associated with FPGA BIST, the test time and the memory required for storing the BIST configurations, are also reduced when compared to previous FPGA-BIST approaches. The BIST techniques presented here also eliminate the need for using any of the user I/O pins, such as a clock, a reset, and test observation pins; therefore, it is suitable for immediate deployment on any system with Xilinx 7-Series FPGAs. With faults detected, isolated, and corrected, the effective MTBF of a system can be extended. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/55123 |
| Date | 30 July 2015 |
| Creators | Modi, Harmish Rajeshkumar |
| Contributors | Electrical and Computer Engineering, Athanas, Peter M., Dietrich, Carl B., Hsiao, Michael S. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0019 seconds