Due to their high surface areas and structural tunability, porous metal-organic materials, MOMs, have attracted wide research interest in areas such as carbon capture, as the judicious choice of molecular building block (MBB) and linker facilitates the design of MOMs with myriad topologies and allows for a systematic variation of the pore environment. Families of MOMs with modular components, i.e. MOM platforms, are eminently suitable for targeting the selective adsorption of guest molecules such as CO2 because their pore size and pore functionality can each be tailored independently. MOMs with saturated metal centers (SMCs) that promote strong yet reversible CO2 binding in conjunction with favorable adsorption kinetics are an attractive alternative to MOMs containing unstaurated metal centers (UMCs) or amines. Whereas MOMs with SMCs and exclusively organic linkers typically have poor CO2 selectivity, it has been shown that a versatile, long known platform with SMCs, pillared square grids with inorganic anion pillars and pcu topology, exhibits high and selective CO2 uptake, a moderate CO2 binding affinity, and good stability under practical conditions. As detailed herein, the tuning of pore size and pore functionality in this platform has modulated the CO2 adsorption properties and revealed variants with unprecedented selectivity towards CO2 under industrially relevant conditions, even in the presence of moisture.
With the aim of tuning pore chemistry while preserving pore size, we initially explored the effect of pillar substitution upon the carbon capture properties of a pillared square grid, [Cu(bipy)2(SiF6)] (SIFSIX-1-Cu). Room temperature CO2, CH4, and N2 adsorption isotherms revealed that substitution of the SiF62- (“SIFSIX”) inorganic pillar with TiF62- (“TIFSIX”) or SnF62- (“SNIFSIX”) modulated CO2 uptake, CO2 affinity (heat of adsorption, Qst), and selectivity vs. CH4 and N2. TIFSIX-1-Cu and SNIFSIX-1-Cu were calculated to exhibit the highest CO2/N2 and CO2/CH4 adsorption selectivites of the series, respectively. Modeling studies of TIFSIX-1-Cu and SIFSIX-1-Cu suggested that the enhancements in low pressure CO2 uptake and CO2 selectivity in the former arose from the stronger polarization of CO2 molecules by TIFSIX-1-Cu. The stronger framework-CO2 interaction at the primary binding site in TIFSIX-1-Cu correlates with the greater electronegativity of the pillar fluorine atoms relative to those in SIFSIX-1-Cu, and in turn to the higher polarizability of Ti4+ vs. Si4+.
The effect of tuning pore size upon the carbon capture performance of pillared square grid nets was next investigated. Linker substitution afforded three variants, SIFSIX-2-Cu, SIFSIX-2-Cu-i, and SIFSIX-3-Zn, with pore sizes ranging from nanoporous (13.05 Å in SIFSIX-2-Cu) to ultramicroporous (3.84 Å in SIFSIX-3-Zn). Single-gas adsorption isotherms showed that SIFSIX-2-Cu-i, a doubly interpenetrated polymorph of SIFSIX-2-Cu with contracted pores (5.15 Å), exhibited far higher CO2 uptake, Qst towards CO2, and selectivity towards CO2 vs. CH4 and N2 than its non-interpenetrated counterpart. Further contraction of the pores afforded SIFSIX-3-Zn, a MOM with enhanced CO2 binding affinity and selectivity vs. SIFSIX-2-Cu-i. Remarkably, the selectivity of SIFSIX-3-Zn towards CO2 was found to be unprecedented among porous materials. Equilibrium and column breakthrough adsorption tests involving gas mixtures meant to mimic post-combustion carbon capture (CO2/N2), natural gas/biogas purification (CO2/CH4), and syngas purification (CO2/H2) confirmed the high selectivities of SIFSIX-2-Cu-i and SIFSIX-3-Zn. Gas mixture experiments also revealed that SIFSIX-3-Zn exhibited optimal CO2 adsorption kinetics. Most importantly, the CO2 selectivity of SIFSIX-2-Cu-i and SIFSIX-3-Zn was minimally affected in the presence of moisture. Modeling studies of CO2 adsorption in SIFSIX-3-Zn (experimental Qst ~ 45 kJ/mol at all loadings) revealed strong yet reversible electrostatic interactions between CO2 molecules and the SIFSIX pillars lining the confined channels of the material.
Porous materials based upon the non-covalent assembly of discrete MBBs can also exhibit high surface areas and systematically tunable pore environments. Molecular porous material (MPM) platforms have begun to emerge despite the greater challenge of designing such materials in comparison to MOMs. Herein we report the tuning of pore functionality in an MPM platform based upon an extensive hydrogen-bonded network of paddlewheel-shaped [Cu(ade)4L2] complexes (ade = adenine; L = axial ligand). The substitution of Cl axial ligands with inorganic TIFSIX moieties has produced [Cu2(ade)4(TiF6)2], MPM-1-TIFSIX, a variant with enhanced CO2 separation performance and stability. Single-gas adsorption isotherms reveal that MPM-1-TIFSIX exhibits the highest CO2 uptake and CO2 Qst yet reported for an MPM as well as high selectivity towards CO2 vs. CH4 and N2. Modeling studies indicated strong electrostatic interactions between CO2 and the TIFSIX ligands lining the pores of MPM-1-TIFSIX. In addition to dramatically surpassing MPM-1-Cl with regard to CO2 separation performance, MPM-1-TIFSIX exhibits thermal stability up to 568 K and retains its performance even after immersion in water for 24 hrs.
Comprehensively, the results presented herein affirm that porous materials featuring inorganic anions and SMCs can exhibit high and selective CO2 uptake, sufficient stability, and facile activation conditions without the drawbacks associated with UMCs and amines, i.e. competitive water adsorption and high regeneration energy, respectively.
Identifer | oai:union.ndltd.org:USF/oai:scholarcommons.usf.edu:etd-7085 |
Date | 28 October 2015 |
Creators | Nugent, Patrick Stephen |
Publisher | Scholar Commons |
Source Sets | University of South Flordia |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Graduate Theses and Dissertations |
Rights | default |
Page generated in 0.0025 seconds