The aim of the diploma thesis was creating a decarbonisation model of lime, implementation the model into CFD tool ANSYS Fluent and to test the decarbonisation model in a model of a real reactor. The required model was based on assumptions for a Shrinking Core Model (SCM). The main objective of this work was the non-catalytic conversion of substances and the search for the most used mathematical models for calcination. The CFD calculation, the sensitivity analysis and the Fluente parametric study were used. Data on the composition of gas flow, temperature, pressure and mass flow of limestone particles were selected for input variables. The particle model called Multiple Surface Reactions (MSR), which is a standard part of Fluent, was used at first. Subsequently, a UDF which was based on the SCM assumptions was written in the programming language C. The results of the CFD calculation were compared with the experimental values from the dissertation. It has been found that the MSR is sufficiently precise for calculation purposes but neglects the internal diffusion of CO2 through the CaO layer which forms behind the reaction front during calcination. It was found that it is possible to solve the flow with ongoing calcination without the need to know the parameters of the Arrhenian equation if the UDF is used. The created UDF incorporates the influence of intraparticular CO2 diffusion on the overall reaction rate.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:367526 |
Date | January 2017 |
Creators | Anderle, Milan |
Contributors | Hájek, Jiří, Vondál, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0116 seconds