In position control systems like linear motor, friction is a key factor to influence the control performance when micron or sub-micron meter accuracy is required. To overcome the effect of the friction, besides a general model of the linear motor system, past researches have shown an additional static friction model of the system is necessary for a better control performance when the motor move into the micro region of the system (usually <100£gm). Two models, macro and micro model of the system have been well constructed by two different identification methods. After model construction, two different controllers are also designed for each model. A traditional pole-placement PID controller can be easily obtained for the macro model to move into the micro region quickly and stably. Then in micro model design, from the experiments, it is found that system parameter varies and thus degrades the positioning performance of the system. So, a Sliding-Mode Controller is designed to improve these problems. With a two step control strategy, macro and micro step, the linear motor positioning system can achieve a 0.1£gm accuracy within 0.2 sec.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0912102-203935 |
| Date | 12 September 2002 |
| Creators | Wang, Chuang-Lin |
| Contributors | Ping-Yi Chao, Chen-Wen Yen, Yih-Tun Tseng |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0912102-203935 |
| Rights | restricted, Copyright information available at source archive |
Page generated in 0.0017 seconds