Return to search

Combined free and forced convection through vertical non-circular ducts with and without peripheral wall conduction

Analysis of combined free and forced convection through vertical non-circular ducts has been carried out using variational technique. Fully developed flow with uniform axial heat input is assumed. All fluid properties are considered invariant with temperature except the variation of density in the buoyancy term of the equation of motion. A general study of the problem has been made in three stages:
(i) Forced convection without circumferential wall conduction.
For this case, a known velocity expression is used and a particularly simple variational expression has been presented. Nusselt numbers are calculated for rectangular, rhombic, isosceles triangular, and right-angled triangular ducts. Results compared with the available solutions have shown excellent agreement.
(ii) Combined free and forced convection without circumferential wall conduction.
Nusselt numbers have been computed for rectangular and rhombic ducts. A finite-difference procedure has also been carried out and the results are presented for rhombic duct only.
In both of the above cases (i) and (ii), the condition of uniform
peripheral heat flux has been directly utilized in deriving the variational
expression, thus releasing the thermal boundary condition from satisfying exactly the condition at the wall.
The condition of uniform circumferential heat flux results in lower values of Nusselt numbers as compared to that of uniform circumferential
wall temperature. This difference in Nusselt number values decreases
with the increase in Rayleigh number. At higher values of Rayleigh number, both the conditions tend to produce about the same results.
(iii) Conjugate problem of combined free and forced convection when peripheral wall conduction is included.
The equations coupling heat conduction in the walls with the convection inside the fluid are solved to establish the influence of peripheral wall conduction. The problem has been solved in a generalized way and the results have been presented for rectangular ducts. It is found that large values of the free convection effects and/or of the conduction parameter tend to minimize the asymmetries in circumferential wall temperature. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/34859
Date January 1970
CreatorsKhatry, Abdul Kader
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0016 seconds