This thesis discusses the design of a stable 150 KW 23MHz RF system for the TRIUMF CRM cyclotron. The required characteristics of this system are presented with emphasis on the amplitude and phase modulation constraints. The composition of an amplifier system satisfying the power, bandwidth and noise requirements is discussed. Both the initial and present PA designs are presented, as is the design of the driver amplifier. Also included is a discussion of the choice of tubes and RF circuits.
The usefulness of feedback control in satisfying the RF stability requirements is shown. The conditions a stable feedback system must satisfy are also given. Two amplitude control systems (drive control and screen control) are designed using Bode techniques. A digital simulation of these systems using an electrical analogue is presented. Implementation and results are discussed. / Science, Faculty of / Physics and Astronomy, Department of / Graduate
Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/33283 |
Date | January 1972 |
Creators | Brackhaus, Karl Heinz |
Publisher | University of British Columbia |
Source Sets | University of British Columbia |
Language | English |
Detected Language | English |
Type | Text, Thesis/Dissertation |
Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0016 seconds