The impedances of cables are some of the parameters needed for various studies in cable systems.
In this work, the impedances of cables are calculated using the subdivisions of the conductors (including ground) in the system. Use is also made of analytically derived ground return formulae to speed up the calculations. The impedances of most linear materials are calculated with a good degree of accuracy but materials with highly nonlinear properties, like steel pipes, give large deviations in the results when they are represented by the linear model used.
The method is used to study a test case of induced sheath currents in bonded sheaths and it gives very good results when compared with the measured values. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Unknown
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/21770 |
| Date | January 1979 |
| Creators | Abledu, Kodzo Obed |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0024 seconds