Calcium phosphate cements are produced by the mixing of calcium phosphate powders in an aqueous solution resulting in a low-temperature synthesized hydroxyapatite. They have been used as bone substitutes and drug delivery systems. The present work examined the possibility of a machine-based modification to this process to derive a standardized preparation method of calcium phosphate cements that could be loaded with Pantoprazole. To examine the characteristics of these novel materials, the following analyses of hand- and machine-made cements, with and without Pantoprazole were undertaken: in vitro surface characterization, dissolution, hydroxyapatite conversion, Pantoprazole delivery, as well as in vivo reparative bone formation and particulate degradation. The in vitro surface characterization, dissolution at different pHs, and drug release analyses showed insignificant differences between hand- and machine-prepared cements. However, machine-made cements showed increased hydroxyapatite conversion, decreased dissolution at pH 7.4, and better in vivo outcomes than commercially available bone-substitute particulate biomaterials.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/11176 |
| Date | 30 July 2008 |
| Creators | Furtado Araujo, Michel Victor |
| Contributors | Davies, John Edward |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
| Format | 4398425 bytes, application/pdf |
Page generated in 0.002 seconds