Incorporation of monoacetylferrocene to the sulfonated polystyrene
ionomers imparted some changes in the properties of sulfonated polystyrene.
Sulfonation was carried out by acetic anhydride and concentrated sulphuric acid.
The sulfonation reaction and the degree of sulfonation were determined by
analytical titration and adiabatic bomb calorimeter .
For this purpose, sulfonated polystyrene (SPS) samples with varying
percentages of sulfonation were prepared between 0.85% and 6.51%. Monoacetyl
ferrocene was used in equivalent amount of sulfonation through addition
procedure.
FTIR Spectroscopy was one of the major techniques used to support the
successful addition of AcFe to the SPS samples. Altering the sulfonation degree
did not change the characteristic peak positions, but increased the peak intensities
with increasing the degrees of sulfonation.
Mechanical properties of resultant polymers were investigated. As a result,
elastic modulus of polymers decreased by the amount of monoacetylferrocene.
Thermal characteristic were found by Differential Scanning Calorimeter
(DSC). Thermal analysis revealed that sulfonated polystyrene samples after
addition of monoacetylferrocene displayed lower values of Tg.
Microscopic analysis were made by Scanning Electron Microscopy (SEM)
and single phase for each sample was observed. Besides, energy dispersed micro
analysis showed an increase in the intensity of the iron (II) peaks that is related to
the amount of monoacetylferrocene added to the SPS samples.
Flame retardancy for each polymer was also examined and found that
addition of monoacetylferrocene to sulfonated polystyrene does not change the
Limiting Oxygen Index value (LOI)(17). However, LOI value for polystyrene is
18.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/3/1108026/index.pdf |
| Date | 01 January 2004 |
| Creators | Buyukyagci, Arzu |
| Contributors | Aras, Leyla |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0015 seconds