Return to search

Testování pryžových těsnících prvků podrobených různým vnějším vlivům / Testing of commercial rubber sealing components exposed to different ambient conditions

Diploma thesis studies the effect of temperature (75 and 105 °C) and the effect of 3 kinds of liquids (silicone and hydraulic oil and coolant) at room temperature and at 105 °C on change of the structure of 3 species butadiene-acrylonitrile (NBR) seals (o-ring and two types of bolts). The seals are inspected by the thermogravimetric analysis, differential scanning calorimetry and infrared spectroscopy, the influence of 105 °C on the o-rings is also evaluated in terms of changes in tensile properties. The greatest changes in the composition and structure are observed on o-rings particularly due to temperature of 105 °C, there was a significant reduction in dilatability and an increase in stiffness and glass transition temperature. The root cause is the surface and centre additive decomposition and oxidation. The bolts have suffered from decomposition of the protective surface layer and the additives in the centre, structural change was minor. Exposure to 75 °C has resulted in a gradual loss of low molecular weight substances. Liquids at room temperature didn‘t affect the structure of the seals, at 105 °C it caused a loss of weight due to decomposition of the protective surface layer and release of additives and the products of their decomposition. Results showed that the common use of the NBR seals at 105 °C is unsuitable, at 75 °C it leads to gradual changes, loss in mechanical and sealing properties.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:240540
Date January 2016
CreatorsJančaříková, Marie
ContributorsPoláček, Petr, Bálková, Radka
PublisherVysoké učení technické v Brně. Fakulta chemická
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.002 seconds