This thesis describes a distributed system of cameras for visually tracking feature points in 3D. The concept of a network of cameras is introduced. Two or more calibrated cameras from a network of cameras are used to triangulate the location of a point in 3D based on camera positions and pan/tilt angles. A survey of methods for interior and exterior calibration is provided and a method suitable for multiple cameras in arbitrary positions has been implemented.
A low-cost camera unit has been designed using off-the-shelf components that include a small CCD board camera and two servo-controlled mechanisms for pan and tilt. Experimental results demonstrate the performance of a network of cameras. / Thesis / Master of Engineering (ME)
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/29388 |
Date | 07 1900 |
Creators | Woo, David C. |
Contributors | Capson, David W., Electrical and Computer Engineering |
Source Sets | McMaster University |
Language | English |
Detected Language | English |
Type | Thesis |
Page generated in 0.0019 seconds