This master's thesis deals with the effects of the cooling rate on the grain size of magnesium alloys based on Mg–Al (AZ91E) and Mg–Zr–RE (WE43B and Elektron21). The effects of the cooling rate are analyzed on samples of varying thickness for different cooling methods (forced–air–cooling, cooling into polymer, natural air cooling). We also evaluated the final microstructure, porosity, hardness, and mechanical properties for investment castings. Based on the evaluated grain sizes, we demonstrated a significant difference in the cooling rate influence on the grain size for the alloy AZ91E. Compared to Zirconium-based alloys (WE43B and Elektron21), for which the zirconium content influences grain size the most. For the alloys based on Mg–Zr–RE, it is possible to prefer casting conditions, without negative enlarging of the grain size.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442743 |
| Date | January 2021 |
| Creators | Jakubcová, Eliška |
| Contributors | Klakurková, Lenka, Juliš, Martin |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds