The goal of renewable solar energy research is to develop low-cost, high-efficiency photovoltaic technologies. However, with the growing deployment of solar cells, approaching the terawatt scale, absorber materials reliant upon rare or unfriendly elements become a crucial issue. Thus, the primary objective of this dissertation is the development of a low-cost fabrication method for (i) thin-film solar cells and (ii) dye-sensitized solar cells using earth-abundant materials. In thin-film solar cells, the kesterite Cu₂ZnSnS₄ with earth abundant elements is used as an absorber layer. It possesses a high absorption coefficient, direct band gap, and good long-term stability compared to the traditional CdTe and Cu(In,Ga)(S,Se)₂ (CIGS) absorber layers. A facile hot-injection approach for synthesizing Cu₂ZnSn(S,Se)₄ nanocrystals with varied Se to (S+Se) ratio is developed to systematically investigate the role of Se in Cu₂ZnSn(S,Se)₄ nanocrystals and the evolution of Cu₂ZnSn(S,Se)₄ nanocrystals to Cu₂ZnSn(S,Se)₄ film during the sulfurization step to address the problems associated with its narrow compositional window and the loss of Sn during heat treatment. Additionally, the existing substrate-type device configuration for these solar cells uses a molybdenum (Mo) back contact, which suffers from serious disadvantages like the (i) presence of a Schottky barrier at the Mo/Cu₂ZnSn(S,Se)₄ interface and (ii) decomposition of Cu₂ZnSn(S,Se)₄ at the Mo interface. Accordingly, a low-cost and Mo-free superstrate-type device configuration of Au/Cu₂ZnSn(S,Se)₄/CdS/TiO₂/ITO/glass is developed to evaluate the conversion efficiency and to avoid the occurrence of a Schottky barrier at the interface and potential decomposition pathways induced by the formation of Mo(S,Se)₂. Furthermore, with the addition of ethyl cellulose, the loss of Sn associated with the conversion of CZTSe to CZTSSe during the grain growth process is mitigated, leading to an increase in the conversion efficiency compared to that of the precursor film without using ethyl cellulose. Such an improvement can provide insight into the grain growth of CZTSSe during the sulfurization process and thereby enhance the feasibility of sustainable, high efficiency CZTSSe solar devices. The excellent characteristics of dye-sensitized solar cells (DSSCs) with short energy-payback time, simple assembly, and eco-friendly features make them a potential option to utilize solar energy. Accordingly, a facile, low-cost, template-free route for TiO₂ hollow submicrospheres embedded with SnO₂ nanobeans is developed for use as a versatile scattering layer in DSSCs. Our designed structure simultaneously promotes dye adsorption, light harvesting, and electron transport, leading to a 28 % improvement in the conversion efficiency as compared with the film-based SnO₂. In addition, a naturally-derived carbonaceous material as a Pt-free counter electrode for DSSCs is also developed for the first time: carbonized sucrose-coated eggshell membrane (CSEM). It is found that the carbonized sucrose-coated eggshell membranes consist of unique micropores of less than 2 nm, which effectively catalyze the triiodide into iodide in the light-electricity conversion process, leading to an improvement in the V [subscript oc] and a competitive efficiency as compared to that of a DSSC with a traditional Pt-based counter electrode. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/28427 |
| Date | 10 February 2015 |
| Creators | Wang, Chih-Liang, active 21st century |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
Page generated in 0.0021 seconds