For usual concrete structure built in several phases, concrete deformations are restrained during the hardening process. When shrinkage is restrained, tensile stresses are induced and a cracking risk occurs. Modelling the evolution of an early age set of parameters on concrete is necessary to predict the early age behaviour of concrete structures. The difficulty lies in the fact that the modelling of concrete properties must be based on experimental data at early age and this data must be obtained automatically because the hardening process of the concrete takes place rapidly during the first hours and also the first days. The thesis deals with experimental and numerical study of the early age properties of cement based materials and more specifically the development of the autogenous deformation, the coefficient of thermal expansion, the E-modulus and the basic creep in compression and tension. For this purpose, a comprehensive work was carried out at ULB and Ifsttar involving the development of a new approach with new test procedures and the design of new testing devices to generate experimental data since the setting of the material. The methodology is based on two repeated testing methods. For the characterization of the viscoelastic behaviour of a concrete since setting, a permanent loading coupled to a test with repeated minute-long loadings is needed. Whereas, the autogenous strain, the coefficient of thermal expansion and the setting are characterized with repeated thermal variations on a concrete sample. The new approach was defined on an ordinary concrete and then extended to the study of the following parameters: the water-cement ratio, the restrained effect of aggregate on the cement paste in the development of concrete properties at early age, the substitution of cement by mineral addition and the difference of behaviour in tension and in compression. Based on these experimental results, new models were developed for the characterization of the early age properties of cement based materials since setting time. An adapted version of the Model Code 2010 for modelling of basic creep is also proposed. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished
| Identifer | oai:union.ndltd.org:ulb.ac.be/oai:dipot.ulb.ac.be:2013/241829 |
| Date | 19 December 2016 |
| Creators | Delsaute, Brice |
| Contributors | Staquet, Stéphanie, Torrenti, Jean-Michel, Espion, Bernard, Massart, Thierry,Jacques, Benboudjema, Farid, Le Roy, Robert, Pichler, Bernhard P. |
| Publisher | Universite Libre de Bruxelles, Université Paris-Est, Ifsttar, MAST, Université libre de Bruxelles, Ecole polytechnique de Bruxelles – Constructions, Bruxelles |
| Source Sets | Université libre de Bruxelles |
| Language | French |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:ulb-repo/semantics/doctoralThesis, info:ulb-repo/semantics/openurl/vlink-dissertation |
| Format | 362 p., No full-text files |
Page generated in 0.0022 seconds