The mining industry is a major economic driver and job creator for many countries. However, mining is associated with geo-hazards and environmental issues, such as the disposal of large volumes of waste, acid mine drainage, and ground subsidence. As a result, efficient mining waste management is crucial for sustainable development. The geotechnical, economic, and environmental benefits of cemented paste backfill (CPB) have piqued the interest of researchers and academicians worldwide, making it an essential aspect of underground mining management. CPB is a thickened cementitious combination of dewatered tailings (70 - 85 wt.%), binders (usually 3 to 8% wt.%), and water used to backfill mine waste into underground mining stopes. Despite being used in small amounts, the cost of cement makes up to 80% of the cost of backfilling operations. In addition, clinker production accounts for 5-8% of global human created carbon dioxide (CO₂) emissions. This predicament necessitates the development of a viable alternative to cement. Partially substituting cement with supplementary cementitious materials like fly ash, blast furnace slag, natural pozzolans, and other materials has been increasingly prevalent in CPB.
It is evident that the addition of slag to cement can increase the mechanical strength of CPB at the advanced ages but decreases the strength and suction development due to the slow reaction kinetics in the CPB at the early ages, which may negatively affect the mechanical stability of the CPB, mining cycle, and safety of mineworkers. Moreover, the supply of these materials is limited and may not be enough for the future needs of the industry. Furthermore, there has been a surge in interest in using limestone powder (LS) owing to its abundance, low cost, and lack of environmental costs which are associated with Portland cement - Type 1 (PCI). The addition of LS accelerates hydration at the early ages, thus resulting in high early strength, but the dilution effect can reduce the late strength. The combination of LS and slag in a ternary blended cement can be potentially used as a binder for CPB with acceptable strength development at the early and advanced ages while lowering the cost of the CPB and the carbon footprint of the mining industry.
Nevertheless, the rheology, mechanical strength, and stability are important key performance quality criteria for CPB; however, the effect of ternary cement blends on these parameters is not well known. In this research program, the impact of the binary and ternary cement blends on (i) the fresh properties of CPB, such as the rheological properties (yield stress, viscosity) and setting time, and (ii) the strength and suction development of CPB are investigated. To understand the effect of substituting slag with LS in the binary binder in the first phase of the study, binary binders with two differ-ent PCI: Slag proportions of 50/50 and 80/20 are examined with no limestone, followed by replacing slag with an increasing amount of LS from 0 to 20 wt. % of the total binder, with a constant cement content, over a period of 4 hrs (0, 0.25, 1, 2, and 4 hrs) of curing at room temperature. In the second phase, the effect of a ternary binder (PCI-Slag- LS) with varying proportions on the suction development and the mechanical behavior of hardened CPB is investigated over a curing period of up to 90 days. The changes in strength of these binary and ternary binders on the CPB sample are tested for 1, 3, 7, 28, 60, and 90 days. An unconfined compression test (UCS) is conducted to evaluate the strength development. The microstructure of the mixes is examined through mercury intrusion porosimetry (MIP) for changes are validated through monitoring for the development of hydration and suction, electrical conductivity (EC), and temperature, which is carried out for up to 30 days. This is followed by a microstructure analysis with a thermogravimetric/differential thermogravimetric test on fresh and hardened samples.
The results of the first phase show that an increase in the percentage of substituted cement in the binary binder (from PCI/Slag 80/20 to 50/50) increases the yield stress of the CPB but decreases the viscosity of the mix. However, the addition of LS as a substitution for slag shows a considerable decrease in the yield stress of the control mix with an increase in viscosity with increasing dosages of LS, thus indicating an improvement in the flowability of CPB. The second phase results indicate that the slow hydration kinetics of slag influences early age suction and strength changes in the binary sample with a high slag content (50/50); however, its latent hydraulic and pozzolanic properties enhance strength gain after 28 days. The addition of 5% limestone to the ternary blend increases the strength gain by up to 7 days compared to the binary control samples. Indeed, the presence of LS influences the rate of hydration of cement and slag through both physical (filler, nucleation, dilution) and chemical (hydrate) effects. However, substituting more than 10% LS for slag affects the mechanical performance at all ages. Overall, up to 50 wt.% slag and 10 wt.% limestone with cement as a ternary binder can be used without significant compressive strength loss.
This study demonstrates that the partial substitution of ordinary Portland cement (OPC) with varying percentages of slag and LS is complementary, and overall, the interaction of slag and LS is observed. The optimal use of LS and slag in a ternary system may serve as a sustainable alternative to the commonly used OPC and PCI/Slag binders, thereby reducing the energy consumption and carbon footprint associated with cement. The findings of this study will ultimately help to develop a better understanding of the impact of ternary blends with increasing percentages of LS on the rheology and setting time of CPB mixes and mechanical strength changes in designing an efficient mixing plant, particularly its transport system.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/45088 |
| Date | 23 June 2023 |
| Creators | Sagade, Aparna |
| Contributors | Fall, Mamadou |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | Attribution-NonCommercial 4.0 International, http://creativecommons.org/licenses/by-nc/4.0/ |
Page generated in 0.003 seconds