This master thesis deals with the landing gear rebuild from tail gear to nose gear of the M-4 Irbis aircraft. The first chapter presents the aircraft in its current state and includes some technical data, too. The theoretical information about types of landing gears, its characteristics, pros and cons and the typical representatives for each type of landing gear are mentioned in the second chapter. The third chapter is about landing gear loads that occur during landing and about the load calculation according to UL 2 regulation. The following chapter shows the construction of the new landing gear, including some of the suggested, but not realised, designs. In the fifth chapter, there is a landing gear strength calculation of some of the gear components. The calculation is analytical and then uses FEM. The very last chapter then shows the effect of new landing gear on the centre of gravity in its extreme positions. The chapter also compares aircraft masses with both landing gears.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442836 |
| Date | January 2021 |
| Creators | Forman, Tomáš |
| Contributors | Vaněk, František, Šplíchal, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds