Return to search

CFD modelling of a hollow fibre system for CO2 capture by aqueous amine solutions of MEA, DEA and MDEA

Yes / A mass transfer model was developed for CO2 capture from a binary gas mixture of N2/CO2 in hollow fibre membrane contactors under laminar flow conditions. The axial and radial diffusions through membrane and convection in tube and shell sides with chemical reaction were investigated. COMSOL software was used to numerically solve a system of non-linear equations with boundary conditions by use of the finite element method. Three different amine solutions of monoethanolamine (MEA), diethanolamine (DEA) and n-methyldiethanolamine (MDEA) were chosen as absorbent in lumen to consider the mass transfer rate of CO2 and compare their removal efficiency. The modelling results were compared with experimental data available in the literature and a good agreement was observed. The CFD results revealed that MEA had the best performance for CO2 removal as compared to DEA and MDEA under various operating conditions due to the different CO2 loading factor of absorbents. Furthermore, efficiency of CO2 removal was highly dependent on the absorbent concentration and its flow rate, increasing of the gas flow rate caused a reduction in gas residence time in the shell and consequently declined CO2 mass transfer. The modelling results showed the influence of the absorbent concentration on the CO2 mass transfer has improved due to availability of absorbent reactants at the gas-liquid interface.

Identiferoai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/10315
Date11 April 2014
CreatorsGilassi, S., Rahmanian, Nejat
Source SetsBradford Scholars
LanguageEnglish
Detected LanguageEnglish
TypeArticle, Published version
Rights© 2016 de Gruyter. Full-text reproduced in accordance with the publisher’s self-archiving policy., Unspecified

Page generated in 0.0021 seconds