Consumption of plastics has increased exponentially, in line with the world's population. Not surprisingly this is reflected in enormous growth of the plastic industry especially during the last five decades. Commensurate with this, waste produced from plastics consumption has created a major environmental problem. Many types of waste disposal methods have been used all over the world so far, but all of them have disadvantages. Furthermore, some methods are responsible for the generation of green house gases and further contribution to global warming. Recently, reduction of green house gas emission has become a target of most industries. Plastic recycling and reuse breaks the cycle of endless production of virgin polymer and thus contributes to a net reduction of green house gas emission. Recycling of plastics should produce materials with improved properties to replace virgin plastics for a variety of applications. Improvement in the properties of recycled plastics can be achieved by blending with other plastics, by filler addition and by modification using free radical initiators. Introduction of the free radical initiator (organic peroxide) during reprocessing of the recycled plastics has been found to offer significant property improvements to the recycled materials. Extremely small amounts of a free radical initiator (typically ranging between 0.01 wt% to 0.2 wt%) is capable of enhancing the properties of the recycled plastics to a great extent. This project investigates the use of free radical initiators in the recycling of post consumer recycled high density polyethylene using reactive extrusion. Both molecular and rheological characterisation of recycled and reprocessed materials was carried out and this was followed by tensile testing of the modified materials to satisfy end use applications such as packaging and drainage piping. Post consumer recycled high density polyethylene (R-HDPE) resin and virgin high density polyethylene (V-HDPE) were reactively extruded with low concentrations of dicumyl peroxide (DCP) and 1, 3 1, 4 Bis (tert- butylperoxyisopropyl) Benzene (OP2) respectively in a twin screw extruder in order to produce modified materials with varying composition (0.0 wt%, 0.02 wt%, 0.05 wt%, 0.07 wt%, 0.10 wt% and 0.15 wt%) of both organic peroxides. Morphological characterisation using modulated differential scanning calorimetry (MDSC) demonstrated that there is a decrease in the crystallinity level for all the modified samples. Shear rheological tests were carried out to study the structure of the modified materials within the linear viscoelastic region. Viscoelastic parameters, such as storage modulus (G'), loss modulus (G
| Identifer | oai:union.ndltd.org:ADTP/210388 |
| Date | January 2008 |
| Creators | Parmar, Harisinh, h_arzoo@yahoo.com |
| Publisher | RMIT University. Civil, Environmental and Chemical Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://www.rmit.edu.au/help/disclaimer, Copyright Harisinh Parmar |
Page generated in 0.0017 seconds