This dissertation examines the dynamics of sediment transport and channel morphology in the lower Mississippi River. The area of research includes the portion of the river where reach-averaged downstream flow velocity responds to the boundary condition imposed by the relatively uniform water-surface elevation of the receiving basin. Observational studies provided data that are used to identify channel-bed sediment composition, and measure bed-material sediment flux and the properties of the fluid-flow field over a variety of water-discharge conditions. The analyses demonstrate that a significant portion of the channel bed of the final 165 kilometers of the Mississippi River consists of exposed and eroding underlying relict sedimentary strata that qualify as surrogate bedrock. The exposed bedrock is confined to the channel thalweg, particularly in river-bend segments, and actively mobile bed-material sediments are positioned on subaqueous bars fixed by river planform. The analyses for sediment flux provides insight to the nature of sediment transport: during low- and moderate-water discharge, bed-material movement occurs primarily as minimal bedform flux, and so bed materials are not transferred between alluvial bars. During high-water discharge, bed-material transport increases one-hundred fold, and sands move as a part of both suspended and bedform transport. Physical models are used to show that skin-friction shear stress increases by a factor of ten for the measured water-discharge range. This change is not possible given conditions of uniform water flow, and therefore non-uniform flow in response to the Mississippi River approaching its outlet has a significant impact on the timing and magnitude of sediment flux through the lower river. In order to estimate the dynamics of bed material movement from the uniform to non-uniform segment of the river (lower 800 km), data for channel morphology are used to construct a model that predicts spatial changes in water-flow velocity and bed-material flux over a range of water-discharge conditions. The model demonstrates that non-uniform flow tends to produce a region of net channel-bed aggradation between 200-700 kilometers above the outlet, and a region of channel-bed degradation for the final 200. The implication for these results for the spatial variability of channel morphology and kinematics is explored. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/9698 |
| Date | 24 January 2011 |
| Creators | Nittrouer, Jeffrey Albert |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Format | electronic |
| Rights | Copyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works. |
Page generated in 0.0019 seconds