For the manufacture of higher strength pipelines to be feasible, a better understanding of the effects of welding on toughness is necessary. Bevel submerged arc welds were performed on X80 grade steel. The subsequent Charpy V-notch (CVN) test results indicated that the notch placement in the various heat affected zone regions, and hence the bead geometry, affected the test results. A series of bead-on-plate (BOP) submerged arc welds then were performed on X70 grade steel plate to determine the effects of current, voltage, heat input, polarity, and waveform manipulation (i.e., balance, offset, and frequency) on both single and tandem weld bead geometry. A new bead profile characteristic, the SP ratio, is proposed to describe weld bead geometry, and its relationship with welding parameters is discussed. Sub-size CVN specimens, pulled from many of the BOP weld coupons, were then tested. The greatest subsize CVN fracture energies were achieved when the bead was produced using lower heat input, and when the bead profile possessed a greater SP ratio. / Materials Engineering
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:AEU.10048/665 |
| Date | 11 1900 |
| Creators | Pepin, Joel |
| Contributors | H. Henein (Chemical and Materials Engineering), D.G. Ivey (Chemical and Materials Engineering), A. Gerlich (Chemical and Materials Engineering), P. -Y. Ben Jar (Mechanical Engineering) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 6584805 bytes, application/pdf |
| Relation | Pepin, Joel. Paper IPC2008-64398. International Pipeline Conference (2008). |
Page generated in 0.002 seconds