Return to search

Ultrafiltration of Alkalilignin Through Dynamic Membranes Formed of Feed Constituents

<p>Membranes formed by constituents of ultrafiltration feed solutions on a support structure are called dynamic membranes. Lignin has the ability to form a self-rejecting membrane potentially useful for separating lignin from pulping wastes.</p> <p>Lignin solutions and pulp mill wastes were circulated past support tubes at different operating conditions. A typical product flux was about 7 gal/ft²day with about 99% rejection. The effect of the feed solution concentration, the pore size of the support structure and the cross-flow velocity were small on the membrane performance. A temperature increase from 30ºC to 70ºC increased the product flux by 130%. A higher operating pressure increased the product flux only slightly above a critical pressure of about 80 psi. The product flux was highly dependent on the pH, being e.g. 30 gal/ft²day at pH2 and 7.5 gal/ftday at pH//.</p> <p>Some chemical additives, reported to alter liquid conformation, were tested and the best results were given by addition of formaldehyde. It increased the product flux at pH2 from 30 gal/ft²day to 42 gal/ft²day. A pretreatment of the carbon support tubes by hydrochloric acid improved the product flux from 6 gal/ft²day to 16 gal/ft²day but the beneficial effect, in this case, was time dependent.</p> / Master of Engineering (ME)

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/9019
Date12 1900
CreatorsHorsti, Seppo Markku
ContributorsBenedek, Andrew, Chemical Engineering
Source SetsMcMaster University
Detected LanguageEnglish
Typethesis

Page generated in 0.0017 seconds