Chemical Vapour Deposition (CVD) diamond detectors were modelled for dosimetry of radiotherapy beams. This was achieved by employing the EGSnrc Monte Carlo (MC) method to investigate certain properties of the detector, such as size, shape and electrode materials. Simulations were carried out for a broad 6 MV photon beam, and water phantoms with both uniform and non-uniform voxel dimensions. A number of critical MC parameters were investigated for the development of a model that can simulate very small voxels. For a given number of histories (100 million), combinations of the following parameters were analyzed: cross section data, boundary crossing algorithm and the HOWFARLESS option, with the rest of the transport parameters being kept at default values. The MC model obtained with the optimized parameters was successfully validated against published data for a 1.25 MeV photon beam and CVD diamond detector with silver/carbon/silver structure with thicknesses of 0.07/0.2/0.07 cm for the electrode/detector/electrode, respectively. The interface phenomena were investigated for a 6 MV beam by simulating different electrode materials: aluminium, silver, copper and gold for perpendicular and parallel detector orientation with regards to the beam. The smallest interface phenomena were observed for parallel detector orientation with electrodes made of the lowest atomic number material, which was aluminium. The simulated percentage depth dose and beam profiles were compared with experimental data. The best agreement between simulation and measurement was achieved for the detector in parallel orientation and aluminium electrodes, with differences of approximately 1%. In summary, investigations related to the CVD diamond detector modelling revealed that the EGSnrc MC code is suitable for simulation of small size detectors. The simulation results are in good agreement with experimental data and the model can now be used to assist with the design and construction of prototype diamond detectors for clinical dosimetry. Future work will include investigating the detector response for different energies, small field sizes, different orientations other than perpendicular and parallel to the beam, and the influence of each electrode on the absorbed dose.
| Identifer | oai:union.ndltd.org:ADTP/274163 |
| Date | January 2009 |
| Creators | Baluti, Florentina |
| Publisher | University of Canterbury. Physics and Astronomy |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Florentina Baluti, http://library.canterbury.ac.nz/thesis/etheses_copyright.shtml |
Page generated in 0.0021 seconds