Return to search

High Efficiency Mass Spectrometry Characterization of Biomaterials

<p> Current factories producing plant-based fossil-fuel replacements are neither environmentally friendly nor economically viable because their main product, bio-oil, is burned for heat rather than sold for profit. However, bio-oil is rich in potentially valuable aromatic compounds. In order to valorize bio-oil and improve the economic viability of the factories, we need to understand bio-oil&rsquo;s composition and the effect of processing parameters&mdash;such as plant feedstock and pretreatment method. Unfortunately, bio-oil is a complex lignocellulosic mixture that is difficult to analyze. To fully characterize the hundreds of compounds present, analysis typically requires top-end mass spectrometers and lengthy separations. This cost prohibits many laboratories from pursuing bio-oil research. Then time-consuming separations limit recursive analyses to optimize process parameters. The question takes shape: is it possible to analyze complex lignocellulosic mixtures without lengthy separations or top-end mass spectrometers? To assess the feasibility of rapid, affordable analysis, I set out to develop qualitative and quantitative methods using a quadrupole-time-of-flight (QTOF) mass spectrometer. I hypothesized that (a) ionization dopants could mitigate the need for lengthy separations pre-injection and that (b) tandem mass spectrometry could compensate for the midrange resolving power of the QTOF. To test this hypothesis, I started by analyzing another lignocellulosic biomaterial: autohydrolyzate, the product of hydrothermal pretreatment of biomass feedstocks. I observed that two anionic dopants&mdash;hydroxide and chloride&mdash;worked exceptionally well for selective analysis of the two major components of a lignocellulosic mixture, lignin- and carbohydrate-derivatives. Tandem mass spectrometry confirmed the game-changing selectivity of the dopants. With these favorable results, I applied the ionization dopants to two case studies. Chloride dopant and tandem mass spectrometry were employed to qualitatively analyze the little understood lignin-carbohydrate complexes found in lignocellulosic mixtures. Hydroxide dopant and tandem mass spectrometry were employed to quantitatively analyze the feasibility of valorizing biooil as a performance-enhancing diesel fuel additive. Both projects offered exciting success that redefined the scope of research possible using a QTOF. I demonstrated that by using ionization dopants and tandem mass spectrometry, it is possible for laboratories with limited means to use a cost-effective QTOF for both qualitative and quantitative analysis of complex lignocellulosic mixtures. </p><p>

Identiferoai:union.ndltd.org:PROQUEST/oai:pqdtoai.proquest.com:10970023
Date25 August 2018
CreatorsBoes, Kelsey Susan
PublisherNorth Carolina State University
Source SetsProQuest.com
LanguageEnglish
Detected LanguageEnglish
Typethesis

Page generated in 0.0092 seconds