This investigation was aimed at measuring the changes in dielectric properties of glass ionomer cements during their setting reaction in order to observe if there is a correlation between these properties and the cement curing. Commercial glass ionomer cements were prepared and their setting process was monitored over a 24 hour period using FT-IR and direct contact impedance measurement. An impedance bridge with a dielectric test assembly, based on previous work by Braden et al, was used to measure the dielectric properties of a number of different glass ionomer cements using a simple design. Using the dielectric properties of the glass ionomer cements, it could be possible to develop a micro-electro-mechanical sensor (MEMS) based on this design, which could be implanted into a dental restoration and interrogated remotely. During the curing of the cements examined, the dielectric data collected from the co-planar assembly showed a change in impedance over the course of the setting of the cement, which when compared to FT-IR spectra over the same period, showed a correlation between the dielectric properties and the chemical changes within the cement.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:669114 |
| Date | January 2015 |
| Creators | Boissonade, Jonathan James |
| Publisher | University of Birmingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.bham.ac.uk//id/eprint/6321/ |
Page generated in 0.0062 seconds