The presence of various impairments in fiber channel has forced researchers to uncover solutions to minimize those effects. With the advancement of technology, optical solutions were finally easier to implement in the system. To this day, optical compensation methods are still found to be as the best way to minimize fiber impairments. With the development of digital signal processing (DSP) and FIR techniques, coherent detection with digital signal processing (DSP) is developed, analyzed theoretically and numerically and experimentally demonstrated in long-haul high speed fiber‐optic transmission system. The use of DSP in conjunction with coherent detection unleashes the benefits of coherent detection which rely on the preservation of full information of the transmitted field. These benefits include high receiver sensitivity, the ability to achieve high spectral‐efficiency and the use of advanced modulation formats. The local oscillator (LO) of coherent receiver alleviates the need for hardware phase‐locking and polarization tracking, which can now be achieved in the digital domain. The computational complexity previously associated with coherent detection is hence significantly diminished and coherent detection is once again considered a feasible detection alternative.
In this thesis, an optical fiber communication scheme using the coherent detection method is simulated. Firstly, at the beginning of each chapter, we introduce the various compensation methods for certain optical fiber impairments which is developed by the pioneers. However, such technique does introduce enormous complexity to the system, in addition to a large cost. For that reason, the main focus had to shift to an alternative method. DSP techniques has enabled simple techniques to mitigate various impairments in fiber-optical systems.
In this thesis, the background knowledge about the structure of fiber-optical transmission system is provided. After the mathematical analysis of the various impairments (laser noise, chromatic dispersion, polarization mode dispersion and nonlinearity) in fiber-optical links, the compensation methods by using DSP techniques are provided. By the methods of fourth-power carrier recovery algorithm and feedforward carrier recovery algorithm, the phase rotation in constellation due to laser noise is compensated in QPSK systems and QAM systems, respectively. The feedforward carrier recovery algorithm has a high tolerance for laser linewidth in high-order QAM system. As for PMD compensation, on the basis of adaptive equalizers in both time domain and frequency domain achiever by the pioneers, a novel LMS algorithm is proposed in this thesis. It has a fair comparative and steady computational complexity with the increase in the number of training blocks. The last part is the nonlinearity compensation. The DBP compensation is a popular method for nonlinearity compensation but its computational complexity is fair high (Shao J, Kumar S and Liang X., 2013). We adopt two kinds of fold-DBP which are distance-folded DBP and dispersion-folded DBP to compensate the joint impairments of chromatic dispersion and nonlinearity in dispersion-managed system. The distance-folded DBP works well in the full compensation dispersion-managed system but in the presence of RDPS, only the dispersion-folded DBP is efficient. / Thesis / Master of Applied Science (MASc)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/16533 |
| Date | January 2015 |
| Creators | Ding, Qiudi |
| Contributors | Kumar, Shiva, Electrical and Computer Engineering |
| Source Sets | McMaster University |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds