Current micro-scale electronics technology has been approaching rapidly towards its technological limit. This has shifted the focus towards nano-scale technology in recent years. More and more researchers around the globe are working in pursuit of bringing nano-scale technology into mainstream. The research carried out here is a small step towards a similar goal. The remarkable optical properties exhibited by certain nano-scale structures are in stark contrast to their bulk form and this provides the basis for this research. Two kinds of nanostructures are developed and investigated for their optical properties. One of these is nanofibers processed from a polymer known as polyaniline (PANI). The focus of this study is to investigate its optical and conductive properties under different conditions of doping environments, temperature and polymerization conditions. Optical characterization technique such as UV-Visible spectroscopy is developed to carry out the investigation. The developed nanofibers have been demonstrated to possess optical and conductive properties to be dependent on doping variables. Study of these optical properties could prove very useful in the development of electrochromic devices and gas sensors. Later in the research, UV-Visible spectroscopy has been improved into a low cost Raman spectroscopy setup which is validated by experimentation carried out on some samples. The second type of nano-structure developed and investigated, is an array of nanoparticles of noble metals such as gold and silver. Such an array is shown to exhibit a phenomenon called plasmon resonance effect when excited by light. UV-Visible spectroscopy technique is utilized to investigate this effect for metal nano-arrays. A biologically nano-structured surface (wing of an insect called cicada) is used as the substrate for the fabrication of metal array. A serious attempt has also been made to do 'Surface Enhanced Raman Spectroscopy (SERS)', making use of the metal nano-array developed. This technique improves the raman lines intensities of certain less sensitive samples such as thiophenol, which are known to give weak raman lines. This is carried out by adsorbing the sample on the metal nano-array.
| Identifer | oai:union.ndltd.org:ADTP/210446 |
| Date | January 2008 |
| Creators | Qasim, Hasan, hasanqasim05@gmail.com |
| Publisher | RMIT University. Science Engineering and Technology |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://www.rmit.edu.au/help/disclaimer, Copyright Hasan Qasim |
Page generated in 0.0017 seconds