Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2017-10-18T20:55:14Z
No. of bitstreams: 1
WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-10-24T23:17:21Z (GMT) No. of bitstreams: 1
WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5) / Made available in DSpace on 2017-10-24T23:17:22Z (GMT). No. of bitstreams: 1
WendellRossineMedeirosDeSouza_TESE.pdf: 7150800 bytes, checksum: 939215abfa16589e581080cb1d3e85f5 (MD5)
Previous issue date: 2017-05-30 / A exposi??o dos po?os de petr?leo a condi??es extremas os tem levado a in?meros problemas de integridade, mesmo quando projetados adequadamente. O uso de t?cnicas de recupera??o, tal como a inje??o c?clica de vapor, submete os materiais a varia??es de temperatura severas reduzindo a vida ?til do po?o; ainda, podendo levar ? falha do revestimento met?lico e da bainha de cimento. A perda da integridade da bainha de cimento pode acarretar no vazamento dos fluidos presentes na forma??o e, em alguns casos, ocasionando significantes preju?zos ambientais e econ?micos. No caso de po?os sujeitos ? inje??o c?clica de vapor, a resist?ncia, a flexibilidade e as propriedades t?rmicas t?m sido apontadas como chave do problema. Neste trabalho, as an?lises termomec?nicas foram realizadas utilizando o m?todo dos elementos finitos em modo transiente. O revestimento met?lico, a bainha de cimento e a forma??o foram modelados utilizando-se um modelo 2D axissim?trico com elementos quadril?teros de 8 n?s. Foi analisado o comportamento mec?nico de bainha de cimento, sendo tr?s formula??es de pastas estudadas: pasta de refer?ncia e mais duas aditivadas com l?tex em concentra??es de 125 e 250 ml/kg de cimento. A influ?ncia da espessura da bainha de cimento e a taxa de aquecimento foram observadas como tamb?m seis diferentes valores de coeficientes de expans?o t?rmica para pasta de cimento. Foram analisados gradientes de temperaturas distintos de 150 oC, 200 oC, 250 oC, 300 oC e 350 oC, t?picas temperaturas encontradas no processo de inje??o de vapor, bem como em meio a forma??es com v?rios n?veis de rigidez. O estudo evidenciou que um dos problemas da integridade da bainha de cimento devido a inje??o de vapor est? associado a fase de aquecimento do po?o e localizado na regi?o da bainha pr?ximo ? forma??o. Foi constatado que vincular o emprego da formula??o mais flex?vel e expansiva a uma aplica??o do gradiente de temperatura de modo mais lento, pode prevenir o surgimento de danos na bainha de cimento evitando manobras de recimenta??o. Tal procedimento se mostrou eficaz para meios rochosos mais r?gidos bem como para temperaturas alvo mais elevadas. / Exposure of oil wells to extreme conditions has led to numerous integrity issues, even when designed properly. The use of recovery techniques, such as the cyclic steam injection, submits the materials to severe temperature variations, reducing the oil well lifespan; and may lead to failure of the steel casing and cement sheath. The loss of integrity of the cement sheath may lead to leakage of the fluids present in the formation and, in some cases, causing significant environmental and economic damages. In the case of wells subjected to the cyclic steam injection, resistance, flexibility and thermal properties have been identified as the key to the problem. In the present work, thermomechanical analyzes were performed using the finite element method in transient mode. The steel casing, the cement sheath and the formation were modeled using an axisymmetric 2D model with 8-node quadrilateral elements. The mechanical behavior of the cement sheath was analyzed, being three formulations of pastes studied: reference paste and two other paste with latex additives in concentrations of 125 and 250 ml / kg of cement. The influence of the cement sheath thickness and the heating rate were observed as well as six different coefficient values of thermal expansion for cement paste. It was analyzed the temperature gradients of 150 oC, 200 oC, 250 oC, 300 oC and 350 oC, typical temperatures encountered during the steam injection process, as well as between formations with various levels of rigidity. The study revealed that one of the problems of cement sheath integrity due to steam injection is associated with the heating phase of the well and located in the region of the sheath near the formation. It has been found that linking the use of the more flexible and expansive formulation to an extending temperature gradient period application may prevent damage to the cement sheath by avoiding recementing maneuvers. Such a procedure proved to be effective for more rigid rock media as well as for higher target temperatures.
| Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/24151 |
| Date | 30 May 2017 |
| Creators | Souza, Wendell Rossine Medeiros de |
| Contributors | 15724520800, N?brega, Ana Cecilia Vieira da, 03226264478, Rodrigues, Marcos Allyson Felipe, 04575614408, Dutra J?nior, Tarcilio Viana, 09599576420, Bezerra, Ulisses Targino, 45109419434, Martinelli, Antonio Eduardo |
| Publisher | PROGRAMA DE P?S-GRADUA??O EM CI?NCIA E ENGENHARIA DE PETR?LEO, UFRN, Brasil |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/doctoralThesis |
| Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0117 seconds