Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, 1999. / Includes bibliographical references (p. 263). / Large vertical (axial) and lateral loads often act on the heads of drilled shafts in jointed rock. In current design practice, the p-y curve method used in design of laterally loaded drilled shafts in soil is adopted in the design of such shafts in jointed rock. The p-y curve method treats the soil as a continuum. The continuum model is not applicable to jointed rock, in which the joints form blocks. A new discontinuum model was developed in this thesis to determine the lateral load capacity of drilled shafts in a jointed rock mass with two and three joint sets. It contains two parts: a kinematic and a kinetic analysis. In the kinematic analysis, the removability theorem of a convex block is expanded to analyze the removability of a block intersecting a pile and the removability of a combination of blocks. Based on these removability theorems, a method was developed to select removable combinations of blocks using easily constructed 2-dimensional figures only. In kinetics, each selected removable combination of blocks is analyzed with the limit equilibrium approach to determine the ultimate lateral load capacity. Although the analysis is similar to slope stability analysis, it is more complicated with the addition of a lateral force exerted by the pile and the vertical pile load exerted on the wedge. The analysis also considers the weight of the wedge, the shearing resistance along the joints, and the vertical pile load exerted on the wedge. Simple analytical relations were developed to solve for the ultimate lateral load capacity. / by Albert C. To. / S.M.
| Identifer | oai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/40018 |
| Date | January 1999 |
| Creators | To, Albert C. (Albert Chi Fu), 1975- |
| Contributors | Herbert H. Einstein., Massachusetts Institute of Technology. Dept. of Civil and Environmental Engineering., Massachusetts Institute of Technology. Dept. of Civil and Environmental Engineering. |
| Publisher | Massachusetts Institute of Technology |
| Source Sets | M.I.T. Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 163 p., application/pdf |
| Rights | M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission., http://dspace.mit.edu/handle/1721.1/7582 |
Page generated in 0.0017 seconds