Composed of a left mold and a right one, an open and close molding mechanism is widely used in various plastic industries. The aim of this study is to design cam-link mechanisms whose right mold motions can rapidly synchronize with their left mold motions so that the mechanisms have higher stiffness for reducing residual vibration.
In structural design of a molding mechanism, the device is actuated by a planar cam mechanism. And a set of cam actuated links is synthesized to drive the left mold. Then, another set of links connected to one of the left mold links is used to synchronously actuate the right mold together with the left mold.
This study first is to synthesize the B-Spline curves for the left mold motion. Subsequently, the linkage sizes are modified base on the mechanical advantages. Then, the motion curves of the right mold and the cam follower device can be analytically determined. And the rigid body dynamic behavior of the mechanism is analyzed. Finally, the geometry of the cam is analyzed and the size of the cam follower rollers are selected to achieve the longer life time at the working speeds.
This research presents eight different design cases to investigate the kinematic and dynamic characteristics of the molding mechanism. As a result, a case with improved kinematic and dynamic performance is selected.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0120111-162517 |
| Date | 20 January 2011 |
| Creators | Chen, Shih-han |
| Contributors | Bor-Jeng Lin, Der-Min Tsay, Jao-Hwa Kuang, Guan-Shyong Hwang, Kuang-Yuh Huang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0120111-162517 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0021 seconds