The research is focused on cladding of inconel 625 using the MAG - CMT method. It was found that welding without an oscillation does not create the necessary geometry to establish additional layers. When welding with an oscillation, it was researched that the current between 150 and 200 A appears most appropriate in the synergistic mode for welding inconel 625. The resulting weld bead was made at a current of 190 A with pulse dynamics correction set to -4 and correction of arc length to +10 and welding speed of 315 mm per minute.The weld bead was not ideal mainly due to insufficient height. The improvement of results could be achieved by set oscilation with fluent change in acceleration. Because of the time options and difficulty of programming it was used only constant speed for all experiments.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443210 |
| Date | January 2021 |
| Creators | Hrádek, Jan |
| Contributors | Mrňa, Libor, Kubíček, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds