Cold pilgering is a challenging tube forming process in terms of modeling due to the complexity in kinematic of tools, friction condition and material behavior. The process development has mostly been based on simple formulas and costly full-scale tryouts. The aim in this study is to develop validated Finite element models of cold pilgering to increase the understanding of influence of the process parameters on the produced tubes. In the course of this thesis, three-dimensional mechanical and thermo-mechanical Finite element models of cold pilgering were developed. The commercial code MSC.Marc was used in the simulations. General 3D models are needed to be able to capture asymmetric deformation in cold pilgering. It was found that tool deflections together with elastic deformation of roll dies have considerable influence on the rolling force. Furthermore, the strain rate and temperature effects on the response of the material and thereby on the rolling force were evaluated.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:du-25902 |
| Date | January 2017 |
| Creators | Azizoğlu, Yağız |
| Publisher | Högskolan Dalarna, Materialteknik, Luleå University of Technology, Luleå : Luleå University of Technology |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Licentiate thesis, comprehensive summary, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Licentiate thesis, 1402-1757 |
Page generated in 0.0023 seconds