The Technical Testing and Analysis Center (TTAC) Group at Oak Ridge National Laboratory performs electromagnetic compatibility testing on various radiation detection units. These tests require remote viewing of the equipment’s display to monitor its compliance with national and international standards. The Commercial-Off-the-Shelf (COTS) camera equipment that is used to monitor the displays exhibits radio frequency susceptibilities causing issues when determining the actual susceptibilities of the device under test. In order to mitigate this issue, a COTS camera was placed in two common test positions and cycled through three angled orientations with various radio frequency shielding methods applied. The development of these shielding methods was investigated in this thesis. The goal was to reduce the number of susceptible frequencies. The reduction of susceptibilities would greatly increase the viewing capacity of the cameras during testing. The techniques discovered have allowed for other COTS camera equipment to be modified and used effectively during electromagnetic compatibility testing.
| Identifer | oai:union.ndltd.org:ETSU/oai:dc.etsu.edu:etd-3858 |
| Date | 01 May 2015 |
| Creators | Mainini, Kevin |
| Publisher | Digital Commons @ East Tennessee State University |
| Source Sets | East Tennessee State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Electronic Theses and Dissertations |
| Rights | Copyright by the authors. |
Page generated in 0.0016 seconds