The design in this work provides an easy and cost-efficient way of performing an FPGA implementation of a specific algorithm through use of a custom hardware design language and communication synthesis. The framework is designed to optimize performance with matrix-type mathematical operations. The largest matrices used in this process are 4x4 matrices. The primary example modeled in this work is MIMO decoding. Making this possible are 16 functional unit containers within the framework, with generalized interfaces, which can hold custom user hardware and IP cores.
This framework, which is controlled by a microsequencer, is centered on a matrix-based memory structure comprised of 64 individual dual-ported memory blocks. The microsequencer uses an instruction word that can control every element of the architecture during a single clock cycle. Routing to and from the memory structure uses an optimized form of a crossbar switch with predefined routing paths supporting any combination of input/output pairs needed by the algorithm.
A goal at the start of the design was to achieve a clock speed of over 100 MHz; a clock speed of 183 MHz has been achieved. This design is capable of performing a 4x4 matrix inversion within 335 clock cycles, or 1,829 ns. The power efficiency of the design is measured at 17.15 MFLOPS/W. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/51149 |
| Date | 15 September 2011 |
| Creators | Quesenberry, Joshua Daniel |
| Contributors | Electrical and Computer Engineering, Patterson, Cameron D., Hsiao, Michael S., Martin, Thomas L. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | Quesenberry_JD_T_20911.pdf |
Page generated in 0.0027 seconds