This thesis focused on the modelling of a pulping process. The purpose was to see if an accurate model can be crated based on relatively simple premises and if the errors can be identified or analysed. To realise this, the authors conducted a literature study to identify the current state of the art regarding the chemical pulping process. In addition, flow charts and sample data from a case study were examined. Based on the literature review and case study, model assumptions were derived. The model is divided into sixteen components. Where mixing occurs, lumped conditions are assumed. The model has five validation points, four of which are temperatures and a mass flowrate. These are shown as deviations from the measured values. In conclusions, it was the model could produce stable results over a narrow time frame. More so if the transition period at the start of the simulation is overlooked. Several new model assumptions are presented with the purpose to increase accuracy e.g. account for the components ability to store mass.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:mdh-41292 |
| Date | January 2018 |
| Creators | Mählkvist, Simon, Pontus, Netzell |
| Publisher | Mälardalens högskola, Akademin för ekonomi, samhälle och teknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds