Approved for public release, distribution unlimited / The concept of a fan-wing aircraft configuration for the purpose of vertical takeoff and landing has drawn much attention. Recently, more investigations revealed that a cross-flow fan (CFF) was capable of providing the propulsion. Several characteristics of the off-design performance of a CFF were experimentally measured, but insufficient numerical predictions were obtained. In the present study, the commercial CFD software ANSYS CFX was employed to calculate the unsteady flow through a CFF with a sliding mesh incorporated. The results of the CFD showed the necessity to re-investigate the cross-flow fan with 12-inch diameter, 1/5-inch span and 30 blades, and additional measurement locations were implemented to carry out a more accurate experiment. A new digital sensor array was used to record the pressures within the experiment, which contributed to the high fidelity of the present data. Successful comparisons wre made between the predicted and measured performance at various rotational speeds from an open throttle position to a setting at stall. Visualization of the computed flow field showed where stall occurred, both within the rotor and in the exhaust duct.
Identifer | oai:union.ndltd.org:nps.edu/oai:calhoun.nps.edu:10945/2408 |
Date | 12 1900 |
Creators | Yu, Huai-Te. |
Contributors | Hobson, Garth V., Shreeve, Raymond P., Naval Postgraduate School (U.S.)., Department of Mechanical and Astronautical Engineering |
Publisher | Monterey California. Naval Postgraduate School |
Source Sets | Naval Postgraduate School |
Detected Language | English |
Type | Thesis |
Format | xiv, 115 p. p. : ill. ;, application/pdf |
Rights | Approved for public release, distribution unlimited, This publication is a work of the U.S. Government as defined in Title 17, United States Code, Section 101. As such, it is in the public domain, and under the provisions of Title 17, United States Code, Section 105, may not be copyrighted. |
Page generated in 0.0018 seconds